Your Quantum Series FaroArm®/ScanArm, or Gage* is shipped with one Lithium-Ion battery pack. Optionally, two batteries can be installed effectively doubling the available working time.
*Gage-Basic models do not support battery operation.
In addition, since only one battery is needed for operation, one battery can be removed and recharged using an external charger, effectively allowing the FaroArm to operate indefinitely on battery power.
To better plan your work sessions, below are the typical run and charge times.
|FaroArm with or without Laser Line Probe (LLP)||Hours|
|Run-time 1 battery with LLP||2|
|Run-time 1 battery without LLP||3|
|Run-time 2 batteries with LLP||4|
|Run-time 2 batteries without LLP||6|
|Charge-time 1 or 2 fully discharged batteries, in FaroArm or in an external charger||3-4|
- Material Safety Data Sheets for Accessories Used with FARO Products
- User Manual for the Quantum S and Quantum M FaroArm and Laser ScanArm
power usage, charge batteries, discharge batteries, battery usage, battery life, battery life cycle, battery life-cycle, battery lifecycle