The 1.5" SMR Permanent Reference Mount is designed for mounting a permanent reference to a surface to securely hold a 1.5" SMR. This mount is used for reference only and is not intended for critical offsets or concentricity. It has a cover to keep dust and dirt out of it and has laser etched dimensions to identify the target holder for component management.
It can be permanently secured using 1/4" bolts, through two counter bored holes in the base. Two 15/64” guide holes can be used as drill guides for the placement of dowels. After drilling 15/64ths holes into the substrate, use 1/4" reamer and then insert dowels to permanently mount the nest in this location.
- Mounting holes: 0.266" diameter, counterbored to 0.438" diameter. 0.250" deep placed on 1.750" centers
- Doweling holes: 0.235" diameter through placed on 1.750" centers
- What are best practices for using Laset Tracker SMRs, targets, and tooling and how does this affect measurements taken with the interferometer and absolute distance meter
laser tracker targets,SMR configurations, SMR properties, SMR Specification