Attached are the steps to verify the accuracy of the USB series FaroArm.
06REF176-090- Acceptance / Accuracy Verification for USB FaroArms. (Advantage, Platinum & Titanium)
06REF176-142 - Acceptance / Accuracy Verification for FARO Gage Arms
06REF176-139 - FaroArm Setup & Techniques for Testing Accuracy
Please note plane to plane dimensions are only acceptable on certified artifacts. These artifacts are precision machines to have near perfect parallel surfaces. When measuring the distance between two sides of a regular plate or block, plane to plane is NOT recommended.
Platinum, Titanium, Gage, Advantage, Accuracy verification, accuracy test, tests, test, accuracy, accuracy usb, usb accuracy, arm accuracy, gage accuracy, calibration, mounting, setup