The Click scanning system is connected to a PC using USB 3.0 and HDMI cables.
The Click scanning system connection ports and power jack are located on the rear of the device.
The USB 3.0 cable should run from the back of the scanner to a USB 3.0 port directly connected to the PC's motherboard. Note: Only Intel C220 or better and Rensas USB 3.0 are currently supported.
USB ports are generally color-coded, and USB 3.0 ports are marked in blue.
The HDMI cable must be connected to the PC's graphic card's HDMI port. The location of this port in the computer may vary according to your PC brand and model.
The power cable is an average 230V cable and must be connected to a power line that can hold such voltage in all phases of work and that is protected from overloads and short-circuits.