You can do one of the following two procedures to reset the communications between the Measure 10 software and the Laser Line Probe (LLP).
- Reboot your computer while leaving the FAROArm on. This will close all the communications to the arm and software. Restart your computer and Measure 10.
- Close the software, turn off the DAC server by right clicking on it and exiting (the computer looking icon in your open task menu typically in the bottom right of your task bar), and turn off the FARO USB driver by right clicking on it and unloading (the USB icon in the open task menu). Leave the arm on the entire time. Now restart Measure 10.
Measure 10, 10, M 10, LLP, scanning, reverse engineering, missing option, grey, not available