"Movie recovery" error on ZEB Cam

Procedure

Your ZEB Cam may be experiencing an error with the message "Movie recovery" displayed on the screen. This can lock up the ZEB Cam. 

In order to resolve this you must hard reset the camera back to its default settings:

1. Remove the battery from the ZEB Cam
2. Hold the Power button down for 5 seconds.
3. Place the battery back into the ZEB Cam.
4. Power on the ZEB Cam to see if the error persists.
5. Go through the options and set the camera back to the desired settings.

Please see the following articles for your specific camera. 

• ZEB CAM for ZEB Horizon – Firefly 8S Reset
• ZEB Cam for ZEB Horizon - Firefly 8SE Reset
• ZEB CAM for ZEB Revo/Revo RT – Firefly 8S Reset
• ZEB CAM for ZEB Revo/Revo RT – Firefly 8SE Reset
• ZEB CAM for REVO – GitUp G3 Camera Reset

If you're not sure which ZEB Cam you have, please see these articles:

• Identifying ZEB Cam Model on ZEB Horizon
• Identifying ZEB Cam Model on ZEB Revo / Revo RT