Replacing the Cable Attaching a ZEB Cam to a ZEB Horizon
Overview
This article explains how to replace the cable attaching a ZEB Cam to a ZEB Horizon.
Procedure
- Detach the ZEB Cam bracket from the ZEB Horizon by unscrewing the four screws in each corner of the bracket.
- Remove the back face of the ZEB Cam by unscrewing the single screw on the face of the bracket.
- Slide the back face of the ZEB Cam off, exposing the inner wiring.
- Wiggle the cable free from the casing at the rubber end and unplug it from the ZEB Cam.
- Replace with a new wire, ensuring both ends are connected securely.
- Slide the back face of the ZEB Cam back into place and secure by screwing the single screw on the face of the bracket.
- Attach the bracket onto the base of the ZEB Horizon using the four screws in each corner of the bracket.