Cleaning the LiDAR Sensor of ZEB Horizon

Procedure Warnings

Avoid using hard water when cleaning the sensor.

Required materials

• Clean microfiber cloths
• Warm water
• Mild liquid dishwashing soap
• Spray bottle with clean water
• Spray bottle with mild soapy water
• 99% Isopropyl alcohol

Procedure Steps

• The ring lens on the LiDAR sensor is manufactured from polycarbonate and may be cleaned with isopropyl alcohol. If your sensor is caked with mud or bugs use the spray bottle to loosen any debris from the sensor. Do not wipe dirt directly from the sensor - spray it off with warm water first.
• If necessary, use the 99% isopropyl alcohol and a clean microfiber towel to clean any bug splatter or other debris from the sensor. Then, use warm, mildly-soapy water and gently wipe the sensor with a clean microfiber towel. Wipe along the curve of the sensor and not top-to-bottom. Spray the sensor with clean water to rinse off the soap and dry with a second microfiber towel.