Fuse Replacement for the Tracer Laser Projector
Overview
In this article you can find instructions on how to replace the protective fuses in the FARO® Tracer Laser Projector.
Procedure
If you experience an electrical power surge that blows the protective fuses in the FARO® Tracer Laser Projector, replace the fuses with 5mm x 20mm 250V 3A Slow Blow fuses.
The Tracer uses two of these fuses held within a tray located at position 2 on the right panel, as shown in this image.
See Also
Keywords
electrical rating, power failure, electrical failure, no power, electrical surge


