Two things are required before following the below steps:
A. The user has to make sure CAM2 Measure 4.0 and CAM2 Measure X are installed on the same system before proceeding
B. The user's portlock has to be enabled to convert 4.0 files to X files. A new portlock may have to be assigned if the following steps do not work. Please contact Customer Service for more information.
In CAM2 Measure X:
Go to File> Import Project Files
Find the file through the path to the location of the .sat file. Then click on the Open button.
*As soon as this file is saved, the format will be the native format of CAM2 X (.fce)
Keywords: header file, header, xml