Skip to main content
                     
As-Built As-Built - Revit As-Built - AutoCAD VirtuSurv - VirtuSurv 2018 As-Built - Modeler VirtuSurv - VirtuSurv 2019          
BuildIT BuildIT - Projector BuildIT - Construction BuildIT - Metrology              
CAM2 CAM2 - SmartInspect CAM2 - 2018 CAM2 - Measure 10 CAM2 - Measure Q CAM2 - Measure X CAM2 - Measure 3/4 CAM2 - AnthroCAM CAM2 - 2019    
Cobalt 3D Imager 3D Imager - Cobalt                  
Computers Computers - All Computers                  
FARO Aras 360 & CAD Zone FARO CAD Zone - Fire & Insurance FARO CAD Zone - Crime & Crash FARO CAD Zone - CZ Point Cloud FARO CAD Zone - First Look Pro FARO 360 - Reality FARO 360 - HD FARO 360 - Blitz FARO 360 - Genius    
FARO Zone present4D - present4D                  
FARO Zone 2D FARO Zone 2D - 2018 FARO Zone 2D - 2019                
FARO Zone 3D FARO Zone 3D - 2018 FARO Zone 3D - 2019                
FARO Zone 3D Advanced FARO Zone 3D Advanced - 2018 FARO Zone 3D Advanced - 2019                
FaroArm/ScanArm FaroArm/ScanArm - Quantum S FaroArm/ScanArm - Quantum M FaroArm/ScanArm - Quantum E FaroArm/ScanArm - Edge FaroArm/ScanArm - Fusion FaroArm/ScanArm - Prime FaroArm/ScanArm - Platinum FaroArm/ScanArm - Legacy Quantum FaroArm/ScanArm - Titanium FaroArm/ScanArm - Advantage
FaroArm/ScanArm FaroArm/ScanArm - Digital Template                  
Gage Gage - Bluetooth Gage - Plus Gage - Standard Gage - Power            
Hand Held Scanner 2D Hand Held Scanner - ScanPlan 3D Hand Held Scanner - Freestyle3D 3D Hand Held Scanner - Freestyle3D X 3D Hand Held Scanner - Freestyle3D Objects            
Language Quality HT MT AT NT INT - Internal          
Languages Language - English Language - Japanese Language - German Language - Chinese Language - Spanish Language - Italian Language - Portuguese Language - French    
Laser Projector RayTracer - RayTracer Laser Projector - Tracer M Laser Projector - Tracer SI              
Laser Radar Imaging Laser Radar - VectorRI                  
Laser Scanner 3D Laser Scanner - Focus S 3D Laser Scanner - Focus M 3D Laser Scanner - Focus3D 3D Laser Scanner - Focus3D X 3D Laser Scanner - Focus3D X HDR 3D Laser Scanner - Focus3D S 3D Laser Scanner - Photon      
Laser Tracker Laser Tracker - Vantage Laser Tracker - ION Laser Tracker - Vantage S Laser Tracker - Si Laser Tracker - X Laser Tracker - Xi Laser Tracker - Vantage E Laser Tracker - Vantage S6 Laser Tracker - Vantage E6  
Legacy Software Legacy Software - CAM2 Gage Legacy Software - Gage Software Legacy Software - Insight              
Open Tech Dental Open Technologies Scanner - NeWay Open Technologies Scanner - Click Open Technologies Scanner - Deluxe Open Technologies Scanner - Smart Open Technologies Scanner - Easy Open Technologies Software - 1Click Open Technologies Software - Optical RevEng Dental Open Technologies Software - ScanWay    
Photonics Scan Head - Digi-Cube Scan Head - Xtreme Scan Head - 3D-Contour Scan Head - 3D-Ultralight Scan Head - 3D-XB Controller - LEC Series Controller - Maestro 3000 Nutfield - Nutfield Hardware Nutfield - Nutfield Software Scan Head - Blink Focuser
Photonics WinLase - Pro WinLase - LAN WinLase - 6              
PointSense PointSense - Basic PointSense - Pro PointSense - Building PointSense - Plant PointSense - Heritage PointSense - Revit CAD Plugin - TachyCAD Building CAD Plugin - TachyCAD Archeology CAD Plugin - TachyCAD Interior CAD Plugin - PhoToPlan Basic
PointSense CAD Plugin - PhoToPlan CAD Plugin - PhoToPlan Pro CAD Plugin - PhoToPlan Ultimate CAD Plugin - DisToPlan CAD Plugin - MonuMap CAD Plugin - hylasFM CAD Plugin - VirtuSurv      
RevEng RevEng - RevEng                  
Scan in a Box Scan in a Box - M Scan in a Box - S                
ScanArm ScanArm - Design ScanArm 2.0 ScanArm - Design ScanArm ScanArm - Forensic ScanArm ScanArm - Design ScanArm 2.5C            
SCENE SCENE - Capture and Process SCENE - WebShare Server and 2Go SCENE - WebShare Cloud SCENE - WebShare 2Go App SCENE - 2018 SCENE - 7.x SCENE - 6.x SCENE - 5.x SCENE - 4.x SCENE - LT
SCENE SCENE - 2019 SCENE - 2go App                
Serial FaroArm Serial FaroArm - Silver Serial FaroArm - Gold Serial FaroArm - Bronze              
Structured Light Scanners Cobalt Design - M Cobalt Design - S Cobalt Design - Dual              
Visual Inspect Visual Inspect - App Visual Inspect - CAD Translator                

BuildIT

Construction

FARO® Knowledge Base

Module 11: Beam Camber with BuildIT Construction

BuildITConstruction-bty.png

BeamCamber-1.pngObjective:

Using BuildIT Construction to measure camber of a beam.

You’ll learn:

  • A simple workflow for analyzing the camber of a beam.
  • Opening BuildIT, opening a BuildIT file and manipulating the viewport.
  • Associating surfaces from the model to the point cloud.
  • Performing surface analysis of the scan data verses the CAD data.
  • Creating annotations of the analysis.
  • Creating a report from the annotations and analysis.

Tutorial Download

If you would like to download the file used in this article, download the accompanying Training Data and extract its contents to a folder on your PC.

Training Data Download
  Download

Navigate to the Area of Interest

Open the “Module 11.buildit” file by selecting “File> Open” and navigating to where the file is saved.

  • Navigate to the area of interest, shown below.
    BeamCamber-2.png

Associate Scan Data to CAD Surfaces

  • Now the scan data should be associated to CAD surfaces. This allows the software to only perform analysis with scan points that are near CAD surfaces, speeding up the process.
    • Select “Refine > Auto Associate”.
    • Select Cloud1 for “Clouds”.
    • For Geometries, select the box and then the whole beam. Group picking GroupPickIcon.png can be enabled to select the whole beam at once.
    • Enter “BEAM” for the “Cloud name suffix”.
    • Ensure “Exclude points farther than” is checked with a value of 6 inches. This option will only search out up to 6 inches for points to associate. If the cloud is farther than 6 inches, it will be ignored.
    • Select “Apply”. ApplyIcon.png
      BeamCamber-3.png

Perform Surface Analysis

  • Now that the points have associated to our CAD, we can perform surface analysis.
    • Select “Evaluate > Surface Deviation Analysis”.
    • For “Surfaces”, select in the area to start the selection. Select the bottom surface of the beam.
    • Set the “Maximum Search Distance” to 6 inches, mirroring the distance set in the Associate command.
    • Select Preview PreviewIcon.png to review the analysis.
    • For “Color scale”, set it to Rainbow – Red-Green-Red. This will make points that are out of tolerance yellow to red and points that are within tolerance green.
    • For “Analysis mode”, select “Colored surfaces + Needles”.
    • For the “Limits”, change to “User-defined”. The tolerance used for this exercise will be 2 inches. Enter 2 for “Upper tolerance” and -2 for “Lower tolerance”.
    • Set the “Needle scale” to 10. This will exaggerate the size of the deviation for analysis.
    • Select “Apply”. ApplyIcon.png
      BeamCamber-4.png
      BeamCamber-5.png

Create Annotations

  • Now, annotations are needed to represent the deviation we see between the scans and CAD.
    • Select “Evaluate > Surface Inspection Analysis”.
    • Select scan points to annotate, then select “ApplyApplyIcon.png to create the annotation, or Middle Mouse Click.
    • Once several annotations have been created, use Set View to save a view with the annotations. Name it Deviation Analysis.
      BeamCamber-6.png

Create a Report from the Annotations and Analysis

  • Include the items created on a report.
    • Select items to include in the report.
      • Include the two views created, the analysis, and the annotations.
    • Right click and select “Add to Report”.
    • If the items are not in the intended order, they can be moved up or down by selecting and dragging the item.
    • Select Run GenerateReportIcon.png to create the report.
      BeamCamber-7.png
      BeamCamber-8.png

Recap:

Congratulations, you have completed the module on beam camber! By now you should have a grasp of how to:

  • A simple workflow for analyzing the camber of a beam.
  • Opening BuildIT, opening a BuildIT file and manipulating the viewport.
  • Associating surfaces from the model to the point cloud.
  • Performing surface analysis of the scan data verses the CAD data.
  • Creating annotations of the analysis.
  • Creating a report from the annotations and analysis.