CAM2, Measure 10, and SmartInspect Device Support by Version
- Last updated
- Save as PDF
Overview
The following table lists supported FARO® devices for CAM2®, Measure 10, and SmartInspect software (by version).
FaroArm/ScanArm and Gage
Be sure to download and install the latest FaroArm® driver to ensure compatibility: USB Driver for the FaroArm, ScanArm, and Gage
| CAM2 | Measure 10 | SmartInspect | |||
|---|---|---|---|---|---|
| Model | CAM2 2024.8 and later | CAM2 2019.2 – 2024.7 | CAM2 2018 – 2019.1 | Measure 10 (Ver. 10.0 – 10.7) | SmartInspect (Ver. 1.0 and later) |
| Quantum X | Yes | Yes** | Yes** | Yes** | Yes** |
| Quantum Max/Gage Max | Yes | Yes | Yes | No | Yes |
| Quantum/Gage | Yes | Yes | Yes | Yes* | Yes |
| Design ScanArm 2.5C, 2.5, and 2.0 | Yes | Yes | Yes | Yes* | Yes |
| Edge | Yes | Yes | Yes | Yes | Yes |
| Design ScanArm 1.0 | Yes | Yes | Yes | Yes | Yes |
| Legacy Quantum | Yes | Yes | Yes | Yes | Yes |
| Prime | Yes | Yes | Yes | Yes | Yes |
| Advantage | Yes | Yes | Yes | Yes | Yes |
| Platinum | Yes | Yes | Yes | Yes | Yes |
| Titanium | Yes | Yes | Yes | Yes | Yes |
| Fusion | Yes | Yes | Yes | Yes | Yes |
| Digital Template | Yes | Yes | Yes | Yes | Yes |
| Legacy Gage | Yes | Yes | No | No | Yes |
| Silver | No | No | No | Yes | No |
| Gold | No | No | No | Yes | No |
| Bronze | No | No | No | Yes | No |
| Sterling | No | No | No | Yes | No |
| Millennium | No | No | No | Yes | No |
*Tested with Measure 10 (v10.7.6), earlier versions may not function correctly.
**Quantum X will be recognized with serial number, but model will be shown as "unknown". We recommend to update to the latest CAM2 version
Laser Tracker
| CAM2 | Measure 10 | SmartInspect | ||||
|---|---|---|---|---|---|---|
| Model | CAM2 2018.4 and later |
CAM2 2018 – 2018.3 |
Measure 10 (Ver. 10.7) |
Measure 10 (Ver. 10.1 – 10.6) |
Measure 10 (Ver. 10.0) |
SmartInspect (Ver. 1.0 and later) |
| Vantage S6, E6 | Yes | No | No | No | No | No |
| Vantage S, E | Yes | Yes | Yes | No | No | No |
| Vantage | Yes | Yes | Yes | Yes | No | Yes |
| ION | Yes | Yes | Yes | Yes | Yes | Yes |
| Si | Yes | Yes | Yes | Yes | Yes | Yes |
| X | Yes | Yes | Yes | Yes | Yes | Yes |
| Xi | Yes | Yes | Yes | Yes | Yes | Yes |
All previous versions of Measure, including Measure 4, Measure X and Measure Q are not compatible with the Vantage, VantageS, VantageE, VantageS6, or VantageE6 Tracker.
Leap ST
| CAM2 | Measure 10 | SmartInspect | |
|---|---|---|---|
| Model | CAM2 2025 and later | Measure 10 (Ver. 10.0 – 10.7) | SmartInspect (Ver. 1.0 and later) |
| Leap ST | Yes | No | No |
3D Imager
| CAM2 | Measure 10 | SmartInspect | |
|---|---|---|---|
| Model | 2018.0 - 2020.21 | Measure 10 (Ver. 10.0 – 10.7) | SmartInspect (Ver. 1.0 and later) |
| Cobalt | Yes | Yes | No |