BuildIT Projector allows manufacturers to plan and operate imaging laser projection and verification workflows to improve the quality and speed of assembly processes. Together with a FARO® Laser Projector, it is a core component of the first and only all-in-one solution for laser-assisted templating and verification. BuildIT Projector is backwards compatible with TracerM (LPT8) and the only software that drives the new TracerSI Imaging Laser Projector system!
The following are the minimum system requirements for FARO® RayTracer™. For configurations that control multiple laser projectors, faster computers with multiple processors are recommended for best performance.
|Processor||Intel dual core 1.0 Ghz||Intel dual core 2.0 Ghz or better|
|Network*||10/100/1000 Mbps—Dual Cards||10/100/1000 Mbps—Dual Cards|
|Memory (RAM)||4 GB||4 GB or better|
|Hard Drive||80 GB free for program files||500 GB|
|USB Port||USB 3.0||USB 3.0|
|Screen Size||768 pixels vertical||768 pixels vertical or better|
|Video Memory||2 GB||2 GB or better|
|Mouse||Wired Mouse||Wired Air Mouse or Trackball|
* Some working environments or installations require dual network cards. In this case, the computer must be capable of housing and using both network cards.
system specifications, release notes, readme, software requirements, computer requirements, computer specifications, install, installation, specs, specifications, hardware, minimum requirements, maximum requirements